|What are the operating steps of the sewing machine?|
|Release time: 2019.11.01 News source: Zibo Nuojin Machinery Plant|
| The following steps should be taken into account when operating the sewing machine : |
1. Put the machine head on the frame guide plate.
2. Connect the oil pipe to ensure that the oil inlet of the stapler is connected to the oil outlet of the pump station, and the oil return of the stapler is connected to the oil return of the pump station.
3. The oil pump is turned on, and the oil pump reversing valve is opened to the working state. Whether the oil pressure is between 10.0-15.0Mpa (the oil pressure is adjusted at the factory).
4. Operate the buckle machine empty to make sure that the action is normal.
5. Select an appropriate belt buckle according to the thickness and strength of the tape, insert the belt buckle along the guide plate, and clamp the tape at the appropriate position of the belt buckle.
6. Adjust the thickness adjustment screw head of the machine head to adapt to the thickness of the selected tape, ensure that the sewing machine is set tightly on the tape, and tighten the lock nut. This work must be done well, otherwise it will seriously affect the quality of the joints and the life of the stapler!
7, push the handle of the mechanism to a high position, when the handle feels hit back, at this time, the lock cylinder is in place, pull the handle back. Pulling the handle back and forth can quickly complete the customization of a section of joint. When the oil pressure is higher than 15.0Mpa, the sewing machine will not work properly and even become dangerous! The operating frequency of the handle must be coordinated with the working frequency of the oil cylinder, not too fast!
|Previous ： No time now Next ： Strong belt buckle is an ideal method of joint|